ROM FLEXI 1900/1100 PTO

Vehicle-mounted toilet service unit

toiletservice unit rom flexi 1900 1100 legen mobiele toiletten 2
REQUEST A QUOTE Click here for the financing possibilities
  • 1,900-litre vacuum tank | 1,100-litre clean water tank
  • PTO: powered by vehicle engine | ≥ 50 cabins per day
  • Total vehicle mass ≥ 6,500 kg (Driver's license C)

The FLEXI 1900/1100 PTO has large capacities yet is still compact. You can easily clean 50 toilet cabins per day. The unit is suitable for mounting on 6.5-7.5 tonne vehicles. The drive is via the vehicle engine. You deliver the vehicle, and ROM takes care of the rest. Just as with the pick-up version, the PTO version is equipped with a high-pressure installation (140 bar - 15 l/min). 

Drive via vehicle engine
Less noise, less fuel consumption and less maintenance. Just some of the advantages of a PTO drive. The installation is powered by the vehicle engine, which means no unnecessary refuelling. This makes it very efficient.  

Maximum capacity
The FLEXI 1900/1100 has a 1,900-litre vacuum tank and three PE clean water tanks with a capacity of no less than 1,100 litres. 
Despite the large capacity, the curb weight of the FLEXI 1900/1100 PTO is only 690 kg. This allows you to take more loads with you, such as toilet cabins, clean and dirty water. 

Safety, comfort and efficiency
The FLEXI 1900/1100 PTO version is largely the same as the pick-up version. Extendable Heavy-Duty toilet cabin stops, ergonomic working height controls, combined oil separator/silencer, pressure gauge, level gauge ... you name it. The same applies to all necessary safety provisions such as overpressure and underpressure safety valves, an emergency stop, double ball safety valve and the moisture separator including a second ball safety valve.

High-pressure installation
The unit is supplied as standard with a high-pressure installation (140 bar - 15 l/min) including a Speck high-pressure pump, reel with automatic roll-up function and 20 m. 3/8” high-pressure hose. 

Would you like more information?
Take a look at the information below, request the catalogue, or call our experts: +31 (0)342 49 04 17. +31 (0)342 49 04 17.

Applications
  • Emptying and cleaning toilet cabins about 50 to 55 toilet cabins per day
  • Mounting on 6½ to 7½ tonne vehicles/“C” driving license
Characteristics
  • Tank capacity (hot-dip galvanised): 1,900-litre vacuum tank | 2 x 400-litre clean water tank & 1 x 300-litre PE clean water tank.
  • Vacuum tank completely hot dip galvanised, both inside and out. All frame parts entirely hot-dip galvanised
  • Equipped with toilet cabin bumpers
  • Drive: PTO driven via vehicle engine. Standard incl. hydraulic oil tank with return filter, hydraulic pump, hydraulic motor and pipework. (Hydropump for MB Atego, MAN TGL, Iveco Eurocargo, Iveco Daily, DAF and Mitsubishi Canter. Other vehicles available on request.
  • Vacuum pump RV4000 with an air displacement of 4,000 l/min.
  • With automatic lubrication
  • Pre-set pressure: 0.65 bar
  • Mounted on anti-vibration subframe
  • Combined oil separator/silencer
  • Optional: high-pressure installation (140 bar - 15 l/min) HD pump including spray gun with double spray lance, 20 m 3/8” high-pressure hose and stainless steel/ABS reel
  • Weight capacity: approximately 690kg
  • Driving licence: C
  • Total vehicle mass: ≥ 6,500 kg
  • Number of cabins to be cleaned (per day): ≥ 50 cabins

Would you like more information?
Take a look at the information below, request the catalogue, or call our experts: +31 (0)342 49 04 17. +31 (0)342 49 04 17.

Performance figures
  • 1,900-litre vacuum tank | 2 x 400 litres & 1 x 300 litres clean water tank (PE, basalt grey) | Vacuum pump RV4000 with air displacement of 4000 l/min.

Would you like more information?
Take a look at the information below, request the catalogue, or call our experts: +31 (0)342 49 04 17. +31 (0)342 49 04 17.

Safety information

  • Equipped with toilet cabin bumpers
  • Optional: high-pressure installation (140 bar - 15 l/min) High-pressure pump including spray gun with double spray lance, 20 m 3/8” high-pressure hose and stainless steel/ABS reel
  • Powerful vacuum pump with an air displacement of no less than 4,000 litres per minute, sprayed in rust-resistant silver metal paint with automatic oil lubrication
  • Handy storage system for the Hi-Vac suction hose
  • Robust 9.1 m Hi-Vac toilets suction hose with 2” suction pipe and ball valve, including suspension system and suction pipe holder
  • 0.5 m ¾” (ND20) drain hose with Geka coupling
  • All safety measures required, such as an emergency stop, over pressure and under pressure safety valves
  • Double ball safety valve to automatically close the vacuum tank as soon as it is full. Protects vacuum pump and prevents contamination of vacuum system and associated costs for maintenance and repair
  • Moisture separator with second ball safety valve; extra protection of vacuum pump against contamination
  • Combined oil separator/silencer; removes oil in an environmentally-friendly way and reduces sound volume for a more pleasant working environment
  • Easy-to-read pressure gauge which makes it easy to read the vacuum in the vacuum tank
  • Level gauge for vacuum tank
  • Heavy-duty toilet cabin stops for attaching and safely transporting toilet cabins
  • Mounting on chassis incl. PTO/vehicle connection (in Barneveld, NL). Vehicle provided must be of the correct version & specifications.

Benefits

  • Standard mounted on chassis, including connection PTO/vehicle (In B’veld, NL). Vehicle needs to have the right version & specifications

  • PTO is an efficient and reliable means of powering to reduce total costs

  • Reliable durable construction with hot-dip galvanised frame and tank, both inside and out

  • Lightweight so more load can be taken on such as toilet cabins or fresh and waste water

  • Furnished with toilet cabin impact bumpers

  • High pressure installation 140 bar - 15 l/min

  • Powerful vacuum pump with an air displacement of max. 4.000 litres per minute, sprayed in silver metallic anti-corrosion paint with automatic lubrication

  • Heavy-duty toilet cabin lashings

  • Robust Hi-Vac suction hose with 2" suction pipe and ball valve, including suspension system and suction pipe holder

  • Several options possible, such as bodywork package; loading platforms, incl. cyclist protection for unit and 4 toilet cabins, incl. accessories

Support from our ROM specialist

Call: +31 (0)342 49 04 17

WhatsApp: +31 (0)342 49 04 17

Email: info@rombv.com

Address: ROM bv | Harselaarseweg 63 | 3771 CC Barneveld (NL)

Demonstration sewer jetter and toilet servicing machines

A no-obligation demonstration will help you find a suitable ROM. Request a demonstration and see the performance of our machines for yourself.

* ask for the possibilities